Latest Products
-
2SK170BL Matched Quad
£9.95
-
Phantom Piezo Preamp
£55.00
-
Stompville re-Stomp Re-amper
£79.00
-
Altoids Piezo Preamp - Discontinued
£0.00
Kit contains PCB, components and pre-programmed microcontroller to build a true bypass relay which allows you to use a momentary action or latching action stomp switch in your effects pedal and also allows an LED status indicator so you don't need a 3PDT switch.
Supplied with expert construction guide. Download the full construction and user guide from the downloads tab. Note: does not include stomp switch or LED. The latest software revision (1N) allows you to preset whether the effect powers-up in effect-on or effect-bypass mode and also gives an indication that the battery voltage is low.
Specifications: supply voltage: 7-20V d.c., length: 27mm width: 29mm depth (height): 11mm.
Supplied with expert construction guide. Download the full construction and user guide from the downloads tab. Note: does not include stomp switch or LED. The latest software revision (1N) allows you to preset whether the effect powers-up in effect-on or effect-bypass mode and also gives an indication that the battery voltage is low.
Specifications: supply voltage: 7-20V d.c., length: 27mm width: 29mm depth (height): 11mm.
-
Start Download
SV101 - User Guide V4