Latest Products
-
Phantom Piezo Preamp V3
£55.00 -
Phantom Piezo Preamp V3
£25.50 -
2SK170BL Matched Quad
£9.95 -
Phantom Piezo Preamp V2
£67.00
Professional-quality hand-built piezo preamp module for building into stompboxes, cajons, cigar-box guitars, hydrophones, etc.
Low distortion, very low noise, wide bandwidth matched-JFET preamp with high impedance unbalanced input and 1/4" jack unbalanced output.
- Suitable for direct connection to mixing console/DAW/Amplifier.
- Solder connections for piezo element.
- Panel-mounted via 11mm (7/16") hole.
- Supplied with 9V battery clip.
This product requires a power supply which may be derived from a standard 9V battery or a regulated, smoothed d.c. power supply with a voltage between 4V and 24V. A power supply voltage between 9V and 18V is recommended.
Note: Piezo transducer element not supplied. Murata 7BB-35-3 recommended. You will also need to fully shield the inside of your instrument using copper foil tape or install the preamp in a shielded enclosure.
Download the user guide from downloads tab.
-
Start Download
SV202 - Unbal Piezo Pre User Guide V1-1