Latest Products
-
2SK170BL Matched Quad
£9.95
-
Phantom Piezo Preamp
£55.00
-
Stompville re-Stomp Re-amper
£79.00
-
Altoids Piezo Preamp - Discontinued
£0.00
New model with J113 JFETs and incorporating zener diode input protection.
Professional-quality hand-built piezo preamp module for building into stompboxes, cajons, cigar-box guitars, etc Low distortion, very low noise, wide-bandwidth matched-JFET preamp with XLR output.
Notes: Piezo transducer element not supplied. You will need to fully shield the inside of your instrument using copper foil tape or alternatively mount the unit in a shielded enclosure.
We sell many of these preamps to artists creating installation pieces where they are used to facitlitate musical interactivity between the public and the installation piece. They have also been used for custom mulit-channel electro-percussion instruments.
We sell many of these preamps for use as preamplifier for hydrophone transducers.
Available as an option with the XLR connector not supplied as often customers wish to solder the output cable directly to the printed circuit board.
Professional-quality hand-built piezo preamp module for building into stompboxes, cajons, cigar-box guitars, etc Low distortion, very low noise, wide-bandwidth matched-JFET preamp with XLR output.
- Suitable for direct connection to mixing console with balanced microphone input and phantom power.
- Takes away the need for external DI box/preamp.
- Complete with input cable for direct connection to Piezo transducer element and mounting screws for XLR socket.
Notes: Piezo transducer element not supplied. You will need to fully shield the inside of your instrument using copper foil tape or alternatively mount the unit in a shielded enclosure.
We sell many of these preamps to artists creating installation pieces where they are used to facitlitate musical interactivity between the public and the installation piece. They have also been used for custom mulit-channel electro-percussion instruments.
We sell many of these preamps for use as preamplifier for hydrophone transducers.
Available as an option with the XLR connector not supplied as often customers wish to solder the output cable directly to the printed circuit board.
-
Start Download
SV206 - User Guide V1.0